1. Home
  2. All Products
  3. Homogenizers
High shear · High pressure · Colloid mill · Laboratory

Homogenizer

A homogenizer breaks droplets and particles in a liquid down to a fine, even size, so the product stays stable. Wahal Engineers makes homogenizer machines in India: high shear rotor-stator homogenizers (inline, batch and bottom-mounted), high pressure homogenizers, colloid mills and laboratory homogenizers. Pick a type below, or compare them in the table.

  • 15 – 200,000 L/hrInline throughput range
  • Nano rangeHigh pressure homogenizer
  • Down to 0.5 µmMulti-stage colloid mill, bitumen emulsion
  • From 2 LLab units to full production
The range

Homogenizer types we make

Exploded view of a Wahal inline high shear homogenizer showing rotor-stator stages, pump housing and motor
High shear

High Shear Homogenizers & Mixers

Rotor-stator homogenizers and mixers: inline, batch, bottom-mounted and lab models.

View machine
High pressure homogenizer: triplex plunger pump with a blue motor, homogenizing valve and pressure gauge on a stainless frame (illustration)
High pressure

High Pressure Homogenizer

Pump homogenizer for nano-range particles: milk products, cell disruption.

View machine
Colloid mill with a stainless feed hopper, rotor-stator housing, gap-adjustment handwheel and blue motor (illustration)
Colloid mill

Colloid Mill

Polished rotor and fixed stator; multi-stage mills reach 0.5 µm on bitumen emulsion.

View machine
Cutaway animation of an inline homogenizer showing particles being sheared in the rotor-stator
Inline

Inline Homogenizer

In the pipeline and self-pumping: 1, 2 or 4 stages, 15–200,000 L/hr.

View machine
Row of a dozen inline homogenizers with grey motors lined up on a workshop floor
Inline

Single Stage Inline Homogenizer

One rotor-stator set, tip speed up to 95 m/s, 20+ head designs.

View machine
Cutaway of a Wahal two-stage inline homogenizer showing the rotor-stator head, with blue motor on a base
Inline

Two Stage Inline Homogenizer

Two rotor-stator sets in series for finer emulsions and dispersions.

View machine
Wahal multi-stage inline homogenizer: exploded render beside a photo of its disassembled rotor-stator heads
Inline

Four Stage Inline Homogenizer

Patented four-stage design; often reaches the target size in one pass.

View machine
Inline shear mixer pump with blue motor on a steel base, pump head opened to show the rotor-stator
Inline

Shear Pump

Pumps and shears in one unit: four-blade rotor, 4 stator heads.

View machine
3D render of a Wahal enclosed shaft homogenizer on a hydraulic lift column with power pack
Batch

In-tank Batch Homogenizer

Lowered into the vessel and built to its size; hydraulic lift available.

View machine
Wahal enclosed shaft homogenizer on a hydraulic lift stand at an exhibition booth
Batch

Enclosed Shaft Homogenizer

Enclosed-shaft rotor-stator for sanitary batches from 1 to 50,000 cP.

View machine
Stainless steel bottom-mounted homogenizer head with a slotted stator, partly wrapped in protective film
Batch

Bottom Mounted Homogenizer

Drive under the vessel; breaks down blocks, rubber bales and hard solids.

View machine
3D render of a Wahal blending vessel with top agitator, angled bottom-mounted mixer and recirculation line
Specialist

Duplex Disintegrator Dissolver

Two rotor-stator stages that break rubber, resin and polymer into liquids.

View machine
Wahal laboratory batch homogenizer on a bench stand, with close-ups of its rotor-stator head
Laboratory

Laboratory Batch Homogenizer

Batch lab homogenizer from 2 litres, same principle as production machines.

View machine
Laboratory inline homogenizer with blue motor, feed hopper and recirculation pipe, 3D render
Laboratory

Laboratory Inline Homogenizer

Benchtop inline homogenizer up to 9,500 rpm, with VFD speed control.

View machine
Wahal laboratory homogenizer head with nameplate and stainless steel shaft
Laboratory

R&D Homogenizer

R&D homogenizers for mL-to-litre batches, with scale-up data.

View machine
Handheld tissue homogenizer with rotor-stator probe clamped to a laboratory stand
Laboratory

Tissue Homogenizer

Breaks down tissue and cell samples to extract proteins, DNA and RNA.

View machine

What is a homogenizer?

A homogenizer is a machine that breaks droplets and particles in a liquid down to a fine, even size and spreads them through the product, so an emulsion or suspension stays uniform and stable. It is also written homogeniser.

Industrial homogenizers work in one of three ways:

  • Rotor-stator (high shear). A rotor spinning inside a close-fitting stator shears the product. It works inline, in the vessel or from under it.
  • High pressure. A high-pressure pump homogenizer, for particle sizes in the nano range.
  • Colloid mill. The product is sheared in the narrow gap between the polished surfaces of a high-speed rotor and a fixed stator.

Homogenizer types compared

TypeHow it worksHow fineScaleTypical uses
Inline high shear homogenizer1, 2 or 4 rotor-stator stages in the pipeline; self-pumpingFiner with each stage; the four-stage model often reaches the target in one pass15–200,000 L/hrContinuous production and single-pass emulsions and dispersions
Batch high shear homogenizerRotor-stator inside the vessel: in-tank or enclosed shaftFine emulsions and dispersions, set by the stator designBuilt to the vessel; 1–50,000 cPGMP batches (enclosed shaft) and chemicals (in-tank)
Bottom mounted homogenizerRotor-stator driven from under the vessel, working on the whole batchFine emulsions and dispersions, set by the stator designBuilt to the vesselHard solids, blocks, rubber bales and powder dissolution
High pressure homogenizerA high-pressure pump homogenizer; works best on a fine, uniform premixNano rangePump sizes from laboratory to industryMilk products, cell disruption, infusion solutions, microemulsions
Colloid millPolished rotor and fixed stator with a narrow gap; single or multi-stageA few micrometres; down to 0.5 µm with our multi-stage mill on bitumen emulsionSingle or multi-stageSauces, mayonnaise, peanut butter, ointments, creams, bitumen emulsion
Laboratory homogenizerThe same rotor-stator principle at bench scaleAs the production machine, so trial results scale upFrom 2 L; lab inline up to 9,500 rpmFormulation trials, R&D and scale-up

How to choose a homogenizer

  1. Nano-range particles, milk products or cell disruption: a high pressure homogenizer, fed with a fine premix from a high shear homogenizer.
  2. Continuous production or single-pass results: an inline homogenizer. The four-stage model often reaches the target particle size without recirculation.
  3. Batches in a vessel: an in-tank or enclosed shaft batch homogenizer, built to the vessel.
  4. Hard solids, blocks or rubber bales: a bottom mounted homogenizer or a duplex disintegrator dissolver.
  5. Pastes and emulsions such as sauces, ointments or bitumen emulsion: a colloid mill.
  6. Not sure yet: try your product on a lab homogenizer or run a trial on a Wahal machine, then scale up.

Options across the range

  • Hygiene: sanitary design configurable to FDA norms; CIP/SIP models on request.
  • Hazardous areas: ATEX motors and control panels; ATEX, NEMA and UL certification on request.
  • Rotor-stator heads: 20+ designs, interchangeable except on the four-stage model.
  • Materials: from alloy steels to various polymers, with the rotor-stator material matched to the application.
  • Validation: DQ, IQ and OQ documents, with FAT at our works or SAT at your site.

Where homogenizers are used

  • Food and dairy: milk products, sauces, dressings, mayonnaise and peanut butter.
  • Pharmaceuticals: suspensions, ointments, creams, gels and infusion solutions.
  • Cosmetics and personal care: creams, lotions and serums.
  • Chemicals and paints: dispersing powders, dissolving solids and reducing particle size.
  • Biotechnology: cell disruption.
  • Bitumen emulsion: multi-stage colloid mills.

How homogenizing works, step by step: see the homogenization process.

Homogenizer manufacturer in India

Wahal Engineers designs and builds homogenizers in Sonipat, India, in an ISO-certified plant. The range includes a patented four-stage inline homogenizer, high shear models from lab scale to 200,000 litres per hour, and high pressure homogenizer pumps.

You can test your product before you buy: see trials and rentals.

Frequently asked questions

What does a homogenizer do?

It breaks droplets and particles in a liquid down to a fine, even size and spreads them evenly, so emulsions and suspensions stay stable. Typical jobs are emulsifying creams and sauces, dispersing powders, dissolving solids and reducing particle size.

What is the difference between a high shear and a high pressure homogenizer?

A high shear homogenizer shears the product between a fast rotor and a close-fitting stator; it makes fine emulsions and dispersions and handles solids. A high pressure homogenizer is a pump homogenizer for nano-range particle sizes and works best on a fine, uniform premix, which a high shear homogenizer often makes. Wahal builds both.

Is a colloid mill a homogenizer?

It does a similar job by a different route: the product is sheared in the narrow gap between a high-speed rotor and a fixed stator with polished surfaces. It brings particles and droplets down to a few micrometres; our multi-stage mill reaches 0.5 µm on bitumen emulsion.

Which homogenizer is used for milk?

Milk products are homogenized with a high pressure homogenizer, which reaches particle sizes in the nano range.

Can I test my product before I buy?

Yes. You can run a trial on a Wahal machine or rent one. Lab homogenizers use the same rotor-stator principle as production machines, so trial results scale up.

Not sure which homogenizer suits your product?

Send us your product, batch size and the result you need, or test it on a Wahal machine before you decide.

WHAT OUR CLIENTS SAY
Testimonial

Give us a call or drop by anytime, we endeavour to answer all enquiries within 24 hours on business days. We will be happy to answer your questions.


Contact:

+(91)-9315799785

Head Office
Plot No. G-39, Friends Industries Area, Shahbad, Daulatpur
New Delhi – 110042, Delhi, India

Factory 

Murthal, Sonipat, Haryana 131039