1. Home
  2. High Shear Homogenizers
  3. Inline High Shear Mixers
  4. Two Stage Inline Homogenizer
Inline High Shear Mixers

Two Stage Inline Homogenizer

Two Stage Inline homogenizer comprises of two sets of a rotor stator assembly having various configurations of rotor-stator heads based upon the application.

  • 2 stagesRotor–stator sets in series
  • Up to 95 m/sTip speed
  • 20+Rotor–stator designs
  • CIP / SIPModel available on request
Request a Quote Book a Machine Trial
Cutaway of a Wahal two-stage inline homogenizer showing the rotor-stator head, with blue motor on a base

Two rotor-stator sets in series give finer emulsions and dispersions than one. Compare it with the single- and four-stage models on our inline homogenizer page.

Performance

Key features

  • Can achieve tip speed of up to 95 m/s
  • Over twenty different rotor stator designs to choose from
  • Self-pumping
  • Can be used in a single pass or a recirculating batch
  • Lower power consumption per cycle
  • Nil or low maintenance
  • CIP/SIP model available upon request
  • Conical shear tools available for extremely narrow particle size distribution
  • Can be force-fed for high viscosity liquids
Build & options

Construction and configuration

Sanitary & hazardous areas

The high shear mixer is designed for sanitary applications and can be configured to meet compliance with FDA norms. It can also be supplied with ATEX approved motors or IEC-60079 flameproof/explosion-proof motors with certification for hazardous applications.

Inlet and outlet

Can be designed as per the specific requirement (flanged, DIN connections, Tri-clamp, ASA, etc.).

Control panel

ATEX approved control panels can also be supplied with our high shear mixers.

Motors

TEFC (totally enclosed fan cooled), explosion-proof / ATEX certified motors can be supplied as standard to be used with frequency inverters or starters. Washdown motors and stainless motors can also be supplied.

Rotor / stator

Can be supplied extra with each high shear mixer (except the 4-stage model) and can be used interchangeably as per the application.

Same family
Cutaway animation of an inline homogenizer showing particles being sheared in the rotor-stator

Inline Homogenizer

Wahal inline homogenizers: 1, 2 or 4 rotor-stator stages, self-pumping, 15–200,000 L/hr, 20+ stator designs, sanitary and ATEX options. Trials available.

View machine
Row of a dozen inline homogenizers with grey motors lined up on a workshop floor

Single Stage Inline Homogenizer

Single stage inline homogenizer with one rotor-stator set, tip speed up to 95 m/s and 20+ head designs. Self-pumping, single pass or recirculation.

View machine
Wahal multi-stage inline homogenizer: exploded render beside a photo of its disassembled rotor-stator heads

Four Stage Inline Homogenizer

Explore the Four Stage Inline High Shear Homogeniser designed for optimal mixing and particle size distribution in various applications.

View machine
Row of a dozen inline homogenizers with grey motors lined up on a workshop floor

Inline High Shear Mixers

Inline high shear mixers for continuous processing: single, two and four stage inline homogenizers and powder induction mixers. Hygienic and ATEX options.

View machine

Not sure which rotor–stator head suits your product?

Tell us about your product and target result, or run a trial on a Wahal machine before you decide.

Book a Machine Trial Request a Quote
WHAT OUR CLIENTS SAY
Testimonial

“After pilot testing the ZR splash mill and 4 stage inline homogeniser , and achieving very positive results we are highly satisfied with the production models installed by Wahal . Our company is primarily using the units for wet dispersion & grinding and experiencing significant improvements in batch cycle time, production efficiency and overall product quality. I highly recommend their products and their creative problem solving approach.”

Mr. Raman PrasadManager, Symbiotec Pharmalabs Pvt. Ltd.

“The laboratory testing units and emulsion plants we have brought from Wahal have given us the desired results and consistency.”

Mr. Kasun DissanayakeOwner, GKUC International, Sri Lanka

“Laboratory and scaled up homogenizers from Wahal have given us good results over the years. The after sales service has been upto the mark too.”

Mr. Tojo AbrahamOwner, Malabar Foods

“We have worked with Wahal in a wide variety of mixers from wet grinding bead mills to inline homogenizers and their team has always been available weather it be new design challenges or installation and after sales.”

Mr. Nirmal SinghManager, IPCA Pharmaceuticals

Give us a call or drop by anytime, we endeavour to answer all enquiries within 24 hours on business days. We will be happy to answer your questions.


Contact:

+(91)-9315799785

Email:
shubham@wahalengineers.com

Head Office
Plot No. G-39, Friends Industries Area, Shahbad, Daulatpur
New Delhi – 110042, Delhi, India

Factory 

Murthal, Sonipat, Haryana 131039

COMPANY
PROCESSES
INDUSTRIES
MACHINE